Airmail Packet

From Digital Traffic System
Jump to: navigation, search
  • Click on Tools
  • Click on Options
  • Click on Modules
  • Click VHF Packet Client - check the block to the left and click on Setup button
  • TNC type
    • Select TNC from the list
    • Select the Comm Port
    • Select the Baud Rate from the TNC to the Computer - not the radio rate
    • Leave the right side alone unless you want to make the packet length 90 - 124 (big numbers don't work well on less than optimal paths)
  • Click Show Hints
  • If you do not know if your TNC is in Command Mode, KISS Mode, HOST mode, or do not know how to get it into Command Mode with the proper settings, then do a soft or hard reset of the TNC to clean up and start fresh.
  • Click OK